|
Dol Strips Atomiser Unit Amitraz Data |
Taktivar, (Fumigation Solution of Amitraz)
|
|---|
Manufactured By:-
Bee Research Institute at Dol, 25266 Libcice n. Vlt. active substance: amitraz 125 g/l INSTRUCTION VARROA CONTROL application form: fumigation The fumigation is applied at an out of door temperature of +lO°C after the bees have finished flying for the day. Prior to the treatment the hive combs are to be arranged so that there may be a 40 mm gap between the outer comb and the hive wall. |
Immediately before treatment the Taktivar is dropped on to
the strip. One hive box needs 2 drops of solution, if the colony
occupies two boxes then 4 drops must be applied. After the drops of
solution have been allowed to soak into the strip for a few seconds,
the strip is ignited along the whole of the lower edge. The strip
should smoulder, it must not burn. If the strip flares up, the flame
is to be blown out immediately. The smouldering strip is fixed in
vertical position by a nail in the middle of the outer comb so that
the strip is 20 mm from the comb and 20 mm from the hive
wall. Then the hive and the entrance are immediately closed. After one
hour the entrance should be re-opened.
|
Supplied in 5 ml dropper bottles in a sealed polythene
sleeve. The bottle is illustrated at top right and the packaging is
illustrated at left. Occasionally packaged with a packet of 50 Dol
Strips and a leaflet in an outer polythene bag.
A 5 ml bottle may seem small, but as the treatment rate is the same as the diagnosis rate, a bottle will treat 100 or so colonies |
|---|
Originated (with incorrect spelling Tactivar)... Summer 2000
Revised... 18 & 21 October 2002