Previous Menu
DAC logo

John Cox Round Bee Escape

John Cox Round Escape This type of escape was marketed by 'Yorkshire Apiaries', they were originally developed for use with, single pane, glass crown boards to provide an escape function. Examples have been found with ten or eight escape paths, but this version, with six, is due to John Cox.

It is 128 mm in diameter made from tinplate sheet. The six tabs are bent at right angles and the phosphor bronze (or beryllium copper) springs are soldered to the bent tabs. The springs are 5 mm wide. No thickness is specified for the spring material, but as the springs themselves are long the thickness can be about twice as thick as a porter escape spring (say about 0.25 mm).

There is no opening as in use the device is placed onto the glass sheet directly over the feed hole, with the tips of the tabs resting on the glass. The bees enter around the periphery, squeeze through the gaps between the spring tips and exit through the hole in the glass.

Details of this escape were published in January 1973, in BIBBA Leaflet No 12, titled 'Making Your Own Glass Quilt' by John Mobley.

Home Previous Menu back TOP Email me!

Written... Spring 2001
Revised... 05 April 2002