Home
Previous Menu

Alternative Lids
Toggle Fastener
"A-Z" INDEX
&   SEARCH
back
DAC logo

Standard Swarm Box Lid



Exclamation Mark As of July 2004 this page will not be further updated. All future updates will occur on the replacement page which is situated at
http://www.dave-cushman.net/bee/swarmboxlid.html
which will open in a new window if you click on the link.


The basic internal dimensions of the standard and Marburg versions of the swarm box are 434 mm x 216 mm, with 5 mm walls that are rimmed with further strips of 5 mm ply, thus we have an overall dimension of 454 mm x 236 mm. (2 mm smaller each way on the Marburg version, due to the use of 9 mm ply, but cardboard shims under the toggle catches on the box will compensate for this discrepancy.)

The material used for the main plate of this item is waterproof exterior grade plywood 9 mm in thickness. The handle parts are softwood and the handle itself has it's central portion rounded with a spokeshave for comfort while carrying.

Standard lid for swarm boxes

This type of lid is positioned on the box and located by the two strips of 9 mm ply, 214 mm long, that are placed 11 mm from each end. The strips also provide a clamping action to any frames that are in the box by pressing them firmly on to the lug bearer strips within the box.

The handle supports and the handle are made from 33 mm x 44 mm stock (which is a common size in UK).

In addition to the handle a small block is placed on each of the unused corners of the handle spacer/supports, this is so that the box presents a flat surface for anything that may be placed upon it (this feature has proved most useful during storage).

The two feeder holes are 75 mm in diameter and are backed by '8' mesh. By carefully drilling pilot holes at the point where the hinges occur the holes can be cut using a fret saw (powered or by hand). The material that is removed can then be used as a blanking plate to cover the mesh and maintain a dark interior. A small wood screw acts as a knob on these hinged blankers. 75 mm was chosen for the diameter as our 'standard' 1lb squat honey jar has a lid of 70 mm diameter.

The lids of the feed jars are perforated by nail punch holes and will sit comfortably in the recesses resting on the mesh. I put sugar syrup in one jar and plain water in the other... This allows the bees to choose whichever they require.

The lids are kept securely in place by strong toggle fasteners that need accurate placement to ensure absolute interchangeability of different lids.

Home Previous Menu back TOP Email me!

Originated... 02 August 2002