Monitors turbidity, conductivity and temperature in the water distribution network

Installing In-Sense
Water Monitor

For further information:

 

Water Products

 

 

 

 

Installation of In-Sence

In-Sense can be installed at almost any point of the distribution network. The method of installation is based around the following simple procedure:

1. A collar fitted to the chosen pipe section allows the pipe to be cut.

2. The valve behind the cutter ensures that this work can be done while the pipe remains under mains pressure.

3. A slide closes the pipe while the In-Sense monitor is fitted into the aperture.

4. Finally the slide is removed, and the system is operational - it's as simple as that!

 

 

Tel. +44 (0) 1223 84 44 44