Piezo driver

Tripie TP 103

Direct PC interface.
Can drive up to 3 channels of piezo devices.
Works under Labview if required

This unique pcb card provides direct drive for piezo electric transducers.  It has three channels and so is particularly cost effective for driving XYZ stages. The card uses standard ISA architecture, with connection to the piezo stages through a standard SMA connector.

All high voltages drives are generated within the PC.

Specification:

Channels	3
Output Voltage	0 to 75V
Output resolution	12 bits (1:4096)
Readback resolution	10 bits
Speed of response	Depends on piezo used but is typically less than 0.5 sec
Software	Windows 98,95,3.1 DOS Low level drivers 16 and 32 bit DLLs

This card can be brought in small quantities from our distributor Melles Griot.

Tel. +44 (0) 1223 84 44 44