Home
History
Speaker Systems
Speaker Components
Speakers with Vitavox parts

Vitavox Owners systems

Buying, Spares & Links
Catalogue Numbers
Vitavox Fans Forum

Vitavox owners systems

Philippe’s system


Below has been translated, the original text is at the bottom of the page.


Since 1990 I have been integrating Vitavox components into my system. The system shown here is detailed as follows:

-Low frequencies are covered by two Focal 10C01 drivers in a Onken W bass reflex cabinet.
-The lower midrange is covered by Vitavox 220S/521 (CN123) horns with Vitavox S2 pressure units.
-The upper midrange is covered by Vitavox CN481’s horns with Altec Lansing 806-8A.
-The tweeters are Fostex 825 and FT90H.

The cut-off frequencies are 350, 1500, 5500 Hz and the super tweeter (FT90H) functions only above 15000 Hz. Filtering for the moment is still passive.
To power this system, I use a Hiraga 20W transistor amplifier for the bass and for the remainder of the band-width is covered by a 4 watt single ended tube amplifier (12AX7, VT52 (45 Special)).

My system is supplemented by 2 turntables (Linn Sondek + Linn Ittok, Garrard 401+ Fidelity Research FR64S), cartridges Denon 103 and Ortophon MC10, an Audiomeca Kréatura CD player, a tube preamplifier (Marantz 7C circuit), and an Accuphase T101 tuner.

Currently this setup is dismantled after having bought a small house, important work must be done there before the reinstatement of my system.









The original text:

Je vous écris, car je viens de découvrir votre site Internet. Je possède depuis 1990 du matériel de marque VITAVOX, que j’ai intégré à mon système. Celui-ci se décline comme suit :

-Les caissons de basses bass reflex de type Onken W avec 2 haut-parleurs 10C01 de marque FOCAL.
-Le bas médium est constitué de pavillons 220S/521 (CN123) avec des chambres de compression S2 de marque VITAVOX.
-Le haut médium est fait de pavillons VITAVOX (CN481) avec des chambres de compression ALTEC LANSING 806-8A.
-Les tweeters sont de marque FOSTEX, des 825 et des FT90H.

Les fréquences de coupures sont 350, 1500, 5500 Hz et le super tweeter (FT90H) ne fonctionne que vers 15000 Hz. Le filtrage pour l’instant est encore passif.
Pour driver ce système, j’utilise dans le grave un amplificateur à transistor HIRAGA 20W et pour le reste de la bande passante un amplificateur à tubes singled-ended (12AX7, VT52 (45 Spécial)) de 4W.
Mon système est complété par 2 platines TD (Linn Sondek + Linn Ittok, Garrard 401+ Fidelity Research FR64S), cellules Denon 103 et Ortophon MC10, un lecteur CD Audiomeca Kréatura, un préamplificateur à tubes (schéma Marantz 7C), un tuner Accuphase T101.

Celui-ci est aujourd’hui démonté car ayant acheté une petite maison, des travaux importants doivent y être fait avant la réinstallation de mon système.

Back to Vitavox Owners systems

Home - History - Speaker Systems - Speaker Components - Speakers using Vitavox parts

Vitavox Owners systems - Buying, Spares & Links - Catalogue Numbers - Vitavox Fans Forum