Pictures of the Ginetta G27 bodywork. The size of these pictures is kept deliberately small to speed up download times. If you want a larger better quality image please email me and I will be happy to forward the required pictures to you.

Main body shell propped against the garage wall to enable drilling of the boot floor to accept the fuel filler and sender unit

 

Enlisting the help of the neighbours to lift the bodyshell back to the floor.

 

Raising the body unit onto its rear valance to allow the rolling chassis to be wheeled into place.

 

GOING.....Body shell being lowered onto the rolling chassis.

 

GOING.....I hope that hole I cut for the fuel filler is in the right place.

 

GONE.....It fits! and first time too.

 

Body mounted to chassis viewed from the rear. Some people say it looks like a Porsche from this angle...Oh dear! thats not the effect I was looking for.

 

Viewed from the front, definitely a Ginetta even without the bonnet.

 

Fuel filler fitted into rear wing

 

Fuel filler connected to tank and tank breather pipe installed

 

Fuel tank breather exits the boot through the wheel arch

 

Cut outs for rear lights. Lower section are fog lights twin upper sections are for Ford Puma tail/stop and indicators

 

Bonnet in place with lights fitted, some alignment work still to do!

Back to Galleries Index