Make sure you take adequate anti-static precautions before continuing any further.
WARNING!! Doing this will void the warranty!
1. First unplug everything connected to your Amiga, and place it on a flat clutter-free surface.
2. Turn the Amiga upside down and unscrew the 5 screws indicated below:
3. Turn the Amiga the right way up, and lift the case at the front under the keyboard. The case should then flip open, but be carefull not to disconnect the power/floppy/HD light cables. You will then see somthing like this:
4. Slide the keyboard up carefully until the bottom is free of the guide rails. Then flip it over carefully, making sure you do not disconnect its data cable.
5. To close the Amiga again, simply reverse these instructions.
